Cisco Flex 7500 Deployment Manual page 65

Wireless branch controller

Hide thumbs Also See for Flex 7500:

Summary

•

Procedure

Complete these steps:

Step 1

No special configuration is needed in order to enable WGB/uWGB support on FlexConnect APs for

WLANs configured for local switching as WGB. Also, clients behind WGB are treated as normal clients

on local switching configured WLANs by Flex APs. Enable FlexConnect Local Switching on a WLAN.

No special configuration is required on WLC in order to support WGB on Flex AP.

Fault Tolerance is supported for WGB and clients behind WGB.

WGB is supported on an IOS AP: 1240, 1130, 1140, 1260, 1600, 1250, 2600, and 3600.

FlexConnect WGB/uWGB Support for Local Switching WLANs

Flex 7500 Wireless Branch Controller Deployment Guide