Advertisement
Client ACL Support
•
•
On AP:
*Mar
0040.96b8.d4be: CLIENT ACL not exist on AP
On WLC:
*spamApTask7: Mar 04 14:51:03.989: #HREAP-3-CLIENT_ACL_ENTRY_NOT_EXIST:
spam_lrad.c:36670 The client 00:40:96:b8:d4:be could not join AP : 34:a8:4e:e7:5b:c0 for
slot 1, Reason: acl returned from RADIUS/local policy not present at AP
The various scenarios are listed in the table below:
ACL present on AP
No
No
Yes
Yes
VideoStream for FlexConnect Local Switching
Introduction
Cisco Unified Wireless Network (CUWN) release 8.0 introduces a new feature—VideoStream for Local
Switching, for branch office deployments. This feature enables the wireless architecture to deploy
multicast video streaming across the branches, just like it is currently possible for enterprise
deployments. This feature recompenses the drawbacks that degrade the video delivery as the video
streams and clients scale in a branch network. VideoStream makes video multicast to wireless clients
more reliable and facilitates better usage of wireless bandwidth in the branch.
Components Used
VideoStream feature for Local Switching is available in CUWN software version 8.0. This feature is
supported on all wireless LAN controllers (WLANs) and newer generation indoor access points (APs).
This feature is unavailable on autonomous access points.
Supported Wireless Hardware and Software
VideoStream is supported on all the following Cisco Wireless LAN controllers:
•
Flex 7500 Wireless Branch Controller Deployment Guide
102
Since ACL not saved in cache at the controller, if the AP reboots/crashes, its cache will not be
updated and the client will have to do full authentication for correct client ACL to be applied.
If an ACL is returned from the AAA server but the corresponding ACL is not present on the AP, the
client will be de-authenticated. A log message will be generated at the AP and WLC console.
4 09:20:43.255: %LWAPP-3-CLIENT_ACL_ENTRY_NOT_EXIST: Deleting Mobile for
ACL returned from AAA
No
Yes
No
Yes
Cisco 5500 Controller
Behavior
N/A
Client will be de-authenticated
Normal L2 authentication.
No ACL will be applied.
L2 Authentication with client
ACL being applied.
Advertisement
