Advertisement
Client ACL Support
(Cisco Controller) >config wlan media-stream multicast-direct 1 ?
enable
disable
All wireless clients requesting to join a stream will be assigned video QoS priority on admission.
Wireless client streaming video prior to enabling the feature on the WLAN will be streaming using
normal multicast. Enabling the feature switch the clients to multicast-direct automatically on the next
IGMP snooping interval. Legacy multicast can be enabled on the WLAN by not checking the Multicast
Direct feature. This will show that wireless clients streaming video are in Normal Multicast mode.
Verifying VideoStream Functionality
Make sure the wireless clients are associated to the access point(s), and are configured for a correct
interface. As seen in the
IP address from VLAN 56 (SSID name—enjoy).The associated clients have an IP address and good
uplink connectivity to the AP.
Figure 66
Enable streaming on the wired side by connecting a video server with a configured multicast address
229.77.77.28. Refer the following link to know how to stream from a Video Sever:
https://wiki.videolan.org/Documentation:Streaming_HowTo_New/#Streaming_using_the_GUI
Flex 7500 Wireless Branch Controller Deployment Guide
112
Enables Multicast-direct on the WLAN
Disables Multicast-direct on the WLAN.
Figure
66, there are three clients associated to one AP. All three clients have an
Client Summary
Advertisement
