Advertisement
Step 6
Check the Enable AP Local Authentication box in order to enable Local Authentication when the AP
is in Standalone Mode.
Note
Step 20 shows how to enable Local Authentication for Connected Mode AP.
Step 7
Check the Select APs from current controller box in order to enable the AP Name drop-down menu.
Step 8
Choose the AP from the drop-down that needs to be part of this FlexConnect Group.
Step 9
Click Add after the AP is chosen from the drop-down.
Repeat steps 7 and 8 to add all the APs to this FlexConnect group that are also part of AP-Group Store
Step 10
1. See
Figure 11
If you have created an AP-Group per Store
be part of this FlexConnect Group
FlexConnect group simplifies network management.
to understand the 1:1 mapping between the AP-Group and FlexConnect group.
(Figure
11. Maintaining 1:1 ratio between the AP-Group and
(Figure
7), then ideally all the APs of that AP-Group should
Flex 7500 Wireless Branch Controller Deployment Guide
FlexConnect Groups
25
Advertisement
