SANYANG INDUSTRY CO. XS125-K Service Manual page 99

11. HEADLIGHT/STEERING FRONT WHEEL/FRONT FORK
Grease the steel balls and cone races, install the
steering stem.
Install the steering top nut and tighten it until snug
against the upper cone race.
Back the op nut out 1/8 turn to let steering stem be
able to rotor freely.
Install the front fork top bridge.
Install the front fork.
Tighten the front fork bottom bridge bolts.
TORQUE: 400-550 kgf
・
Tighten the steering stem nut.
TORQUE: 600-800 kgf
・
Tighten the front fork top bridge bolts.
TORQUE: 400-550 kgf
・
Install the handlebar, meter, headlight and front wheel.
11-10
cm
cm
cm
TOP BRIDGE BOLT
FRONT FORK
TOP BRIDGE