Engine Installation - SANYANG INDUSTRY CO. XS125-K Service Manual

4.ENGINE REMOVAL/INSTALLATION
Remove the front engine hanger bolt.
NOTE:
Places jack or padded block under the engine before
removing the front engine hanger.
Disconnect the starter motor wire.
Remove the 10mm bolts of the rear engine hanger.
Remove the engine.
NOTE:
Prevent damage to wire harnesses and cables during
operation.

ENGINE INSTALLATION

Follow the reverse procedure of removal to install the
engine.
Notice the following items during installation:
Ÿ Route all wire harnesses and cables properly.
Ÿ Adjust the throttle grip free play (P2-10)
Ÿ Adjust the clutch lever free play (P2-12)
Ÿ Adjust the drive chain slack (P2-14)
Ÿ Fill the crankcase with the recommended grade oil
to the proper level.
SAE 10W -40 APl: SL
4-4
LIQUI MOLY
BOLTS
FRONT ENGINE HANGER
BOLT