Headlight/Steering/Front Wheel/Front Fork - SANYANG INDUSTRY CO. XS125-K Service Manual

11. HEADLIGHT/STEERING FRONT WHEEL/FRONT FORK
TROUBLE SHOOTING ...........................11-1
SERVICE INFORMATION......................11-1
HEADLIGHT.............................................11-2
METER.....................................................11-3
TROUBLE SHOOTING
FRONT WHEEL WOBBLING
1. Axle not tightened properly
2.Worn front wheel bearing
3. Distorted rim
HARD STEERING
1. Steering stem nut too tight
2. Faulty steering stem bearing
3. Insufficient tire pressure
STEERS TO ONE SIDE
1. Bent front axle
2. Bent front fork
3. Faulty front wheel
4. Misadjusted shock absorber
SERVICE INFORMATION
GENERAL INSTRUCTIONS
This section covers the removal, inspection and
installation of the front wheel, front fork and steering.
Before removing the front wheel, place a block under
the engine.
TORQUE VALUES
Front wheel axle nut
Handlebar upper holder
Steering stem nut
Front fork top bridge
Front fork bottom bridge
SPECIFICATIONS
Axle runout
Axial
Rim runout
Radial
HANDLE BAR .........................................11-3
FRONT WHEEL ......................................11-4
FRONT FORK..........................................11-7
STEERING STEM...................................11-8
SOFT SUSPENSION
1. Weak rear fork spring
2. Insufficient fluid in the front forks
HARD SUSPENSION
1. Bent front fork
2. Too much fluid in the front forks
FRONT SUSPENSION NOISE
1. Bent front fork
2. Insufficient fluid in the front fork
3. Loose front fork fasteners
600 ~ 800 kgf cm
・
100 ~ 140 kgf cm
・
600 ~ 800 kgf cm
・
400 ~ 550 kgf cm
・
400 ~ 550 kgf cm
・
STANDARD SERVICE
.....................
.....................
.....................
LIMIT
2.0mm
2.0mm
2.0mm
11-1