SANYANG INDUSTRY CO. XS125-K Service Manual page 81

9.
CAMSHAFT/CRANKSHAFT/CRANKCASE/TRANSMISSION/KICKSTARTER
Install the crankshaft assemblies in the right
crankcase.
Install the mainshaft and countershaft assemblies in
the right crankcase.
NOTE:
Keep the thrust washers in place during installation.
Install the mainshaft, countershaft and shift forks.
Install the gearshift drum.
Install the shift fork shaft.
NOTE
:
Engage the shift fork guide pin with the drum
groove by raising the shift fork.
After assembling, check each part for moving
freely.
MAINSHAFT
SHIFT FORK
SHIFT FORK SHAFT
CRANKSHAFT
GEARSHIFT DRUM
9-9