General Information - SANYANG INDUSTRY CO. XS125-K Service Manual

SERVICE RULES ...................................1-1
SPECIFICATIONS ..................................1-2
SERVICE RULES:
(1)Use new packings, gaskets,O-rings and cotter
pins space and clipes whenever reassembling.
(2)When tightening bolts or nuts, begin on center or
larger diameter bolts and tighten them in criss-
cross pattern in two or more steps if necessary.
(3)Use genuine SANYANG parts and lubricants or
those equivalent. When parts are to be reused,
they must be inspected carefully to make sure they
are not damaged or deteriorated and in good
usable condition.
(4)Use special tool when use of such a tool is
specified.
Symbol Marks:
:Apply engine oil.
:Apply grease.

1.GENERAL INFORMATION

TORQUE VALUES .................................1-3
TROUBLE SHOOTING ...........................1-4
(5)Clean all removed parts in or with solvent, and
lubricate their sliding surfaces upon disassembly.
(6)Coat or fill parts with specified grease where
specified.
(7)Upon assembling, check every possible part for
proper installation and movement or operation.
(8)Work safely and give your work your undivided
attention. Exchange signals as frequently as possi-
ble when a work involves two or more workers. Do
not run the engine unless the shop or working area
is well ventilated.
NOTE: Things must be noticed.
CAUTION: Things that could cause damage to the
engine parts.
WARNING: Things that could cause damage to
the person or partner.
1-1