Axle Inspection - SANYANG INDUSTRY CO. XS125-K Service Manual

12. REAR WHEEL/REAR SUSPENSION
REAR WHEEL
REAR WHEEL REMOVAL
Raise the rear wheel off the ground on the main
stand.
Remove the exhaust muffler.
Disconnect the brake rod from the brake arm.
ADJUSTING NUT
Disconnect the brake torque link from the brake
panel.
Remove the axle nut and loose the chain adjusting
nut. Pull out the axle shaft and remove the drive chain
from the drive sprocket, then remove the rear wheel.

AXLE INSPECTION

Set the axle in the V-blocks and measure the runout.
The actual runout is 1/2 of the total indicator reading.
service limit: 0.2mm under
12-2