Front Fork Installation; Steering Stem - SANYANG INDUSTRY CO. XS125-K Service Manual

11. HEADLIGHT/STEERING FRONT WHEEL/FRONT FORK
If the front fork is too soft or too hard, refill
or drain the shock absorber fluid.
Shock absorber fluid:
CUSHION OIL
Standard capacity :160c.c
Recommeded LIQUI MOLY
FRONT FORK
INSTALLATION
Install the front fork from the bottom.
NOTE:
Turn the front fork left and right by hand while
installing.
Tighten the fork top bridge bolts.
TORQUE: 400-550 kgf
・
Tighten the fork bottom bridge bolts.
TORQUE: 400-550 kgf
・
Install the front fender.
Install the front wheel.

STEERING STEM

FRONT FORK TOP REMOVAL
Remove the handlebar.
Remove the headlight and meter assembly.
Remove the front fork.
Remove the steering stem nut and washer.
11-8
cm
cm