SANYANG INDUSTRY CO. XS125-K Service Manual page 116

IGNITION COIL
IGNITION COIL REMOVAL
Remove the seat.
Remove the fuel tank.
Remove the spark plug cap.
Disconnect all wires to the ignition coil.
Remove the ignition coil.
IGNITION COIL TEST
Check the ignition coil output using a tripolar tester.
NOTE:
Follow the instructions described in the user
manual.
Check the primary circuit, it is normal if there is
conductivity when connecting a ohmmeter.
PRIMARY COIL
SECONDARY COIL
0.31±0.03KΩ
4.0±0.4KΩ
14. IGNITION SYSTEM
IGNITION COIL
14-3