Camshaft Removal - SANYANG INDUSTRY CO. XS125-K Service Manual

5. CYLINDER HEAD/ VALVE

CAMSHAFT REMOVAL

NOTE:
The camshaft, rocker arm and rocker arm shaft can
be serviced with the engine installed on the frame.
Remove the cam sprocket cover.
Remove the crankshaft hole cap and the timing
inspection hole cap.
Rotate the generator rotor counterclockwise and
locate the piston at the T.D.C. of the compressing
stroke.
Remove the cam sprocket bolts and remove the cam
sprocket.
NOTE:
Take care not to drop then bolt into the
crankcase.
Suspend the cam chain with a wire to prevent it from
falling into the crankcase.
Remove the camshaft.
CAM SPROCKET
COVER
INDEX MARK
"O" MARK
5-3