Shock Absorber - SANYANG INDUSTRY CO. XS125-K Service Manual

12. REAR WHEEL/REAR SUSPENSION
Install the hold arm.
Install the brake linkage.
Adjust the drive chain tension (2-13).
Drive chain slack: 10 ～ 20mm
Tighten the chain tension adjusters.
Tighten the axle nut.
TORQUE: 1000～1200 kg f cm
・
Apply engine oil to the drive chain.
Install the step bar and the muffler.
ADJUSTING NUT

SHOCK ABSORBER

SHOCK ABSORBER REMOVAL
Remove the left and right shock absorber assembly.
SHOCK ABSORBER DISASSEMBLY
HOLDER
Compress the shock absorber spring with a shock
absorber compressor.
Loosen the lock nut, remove the upper holder.
12-6