Switches/Horn - SANYANG INDUSTRY CO. XS125-K Service Manual

TROUBLE SHOOTING ...........................15-1
SERVICE INFORMATION......................15-2
MAIN/DIMMER SWITCH ........................15-3
WINKER/HORN SWITCH.......................15-3
HEADLIGHT SWITCH ............................15-3
TROUBLE SHOOTING
NO LIGHTS COME ON WHEN IGNITION
SWITCH IS TURNED ON:
1. Battery low
2. Wiring loose or blown
3. Fuse blown
4. Open or shorted wiring
5. Faulty combination switch
6. Bulb at fault or burned out
ALL LIGHTS COME ON BUT DIMLY WHEN
IGNITION SWITCH IS TURNED ON:
1. Battery low
2. Wiring or switch has excessive resistance
HEADLIGHT BEAMS DO NOT SHIFT WHEN
HIGH-LOW SWITCH IS OPERATED:
1. Faulty dimmer switch
2. Faulty headlight switch

15. SWITCHES/HORN

HEADLIGHT SWITCH ............................15-3
START/HAZARD SWITCH.....................15-3
FRONT/REAR BRAKELIGHT SWTICH
HORN SWTICH .......................................15-4
........15-4
15-1