Cleaning The Printer; Cleaning The Exterior; Cleaning The Scanner - Xerox VersaLink C505 User Manual

Maintenance
• Ensure that any parts removed during cleaning are replaced before you plug in the
printer.

Cleaning the Printer

Cleaning the Exterior

Clean the exterior of the printer once a month.
• Wipe the paper tray, output tray, control panel, and other parts with a damp, soft
cloth.
• After cleaning, wipe with a dry, soft cloth.
• For stubborn stains, apply a small amount of mild detergent to the cloth and gently
wipe the stain off.
Caution
Do not spray detergent directly on the printer. Liquid detergent could enter the printer
through a gap and cause problems. Never use cleaning agents other than water or mild
detergent.

Cleaning the Scanner

Clean the scanner about once a month, when anything is spilled on it, or when debris or
dust collect on any of the surfaces. Keep the feed rollers clean to ensure the best possible
copies and scans.
1. Remove any paper from the Document Feeder Tray, and the Document Output Tray.
2. Open the Document Cover.
3. Slightly dampen a soft, lint-free cloth with water.
4. Clean the document glass.
7-2
® ®
Xerox VersaLink C505 Multifunction Printer
User Guide