Glossy Cardstock; Guidelines For Printing On Glossy Cardstock - Xerox VersaLink C505 User Manual

Paper and Media
6. If the Tray Mode is set to Fully Adjustable, the printer prompts you to set the label
sheet size, type and color.
a) If the paper size, type and color are correct, touch OK.
b) If the paper size, type or color are incorrect, change the settings.
• To select a sheet size, touch the current size setting, then from the list, select
the size.
• To select the paper type, touch the current paper type, then from the list,
select Labels.
• To select a different color, touch the current color, then from the list, select
the color.
c) To save the settings, touch OK.

Glossy Cardstock

You can print Cardstock and Glossy Cardstock up to 220 g/m² from the Bypass tray and
Trays 1-5. For types and weights of supported Cardstock, refer to
and Weights.

Guidelines for Printing on Glossy Cardstock

• Do not open sealed packages of glossy cardstock until you are ready to load paper
into the printer.
• Leave glossy cardstock in the original wrapper, and leave the packages in the shipping
carton until ready to use.
• Remove all other paper from the tray before loading glossy cardstock.
• Load only the amount of glossy cardstock you are planning to use. When you are
finished printing, remove the cardstock from the paper tray. Replace unused cardstock
in the original wrapper and seal.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause
glossy cardstock to curl and jam in the printer.
• In the print driver software, select the glossy cardstock type, or select the tray loaded
with the required paper.
6-26
Supported Paper Types
® ®
Xerox VersaLink C505 Multifunction Printer
User Guide