Ozone Release; Printer Location; Printer Supplies - Xerox VersaLink C505 User Manual

Safety
• Keep hands, hair, neckties, and so on, away from the exit and feed rollers.
• Covers, which require tools for removal, protect the hazard areas within the printer.
Do not remove the protective covers.
• Do not override any electrical or mechanical interlock devices.
• Do not attempt to remove paper that is jammed deeply inside the printer. Switch off
the printer promptly and contact your local Xerox representative.
Warning
• The metallic surfaces in the fuser area are hot. Always use caution when removing
paper jams from this area and avoid touching any metallic surfaces.
• To avoid a tip hazard, do not push or move the device with all the paper trays
extended.

Ozone Release

This printer produces ozone during normal operation. The amount of ozone produced
is dependent on copy volume. Ozone is heavier than air and is not produced in amounts
large enough to harm anyone. Install the printer in a well-ventilated room.
For more information in the United States and Canada, go to
www.xerox.com/environment
representative or go to www.xerox.com/environment_europe.

Printer Location

• Place the printer on a level, solid, non-vibrating surface with adequate strength to
hold its weight. To find the weight for your printer configuration, refer to
Specifications.
• Do not block or cover the slots or openings on the printer. These openings are provided
for ventilation and to prevent overheating of the printer.
• Place the printer in an area where there is adequate space for operation and servicing.
• Place the printer in a dust-free area.
• Do not store or operate the printer in an extremely hot, cold, or humid environment.
• Do not place the printer near a heat source.
• Do not place the printer in direct sunlight to avoid exposure to light-sensitive
components.
• Do not place the printer where it is directly exposed to the cold air flow from an air
conditioning system.
• Do not place the printer in locations susceptible to vibrations.
• For optimum performance, use the printer at the elevations specified in Elevation.

Printer Supplies

• Use the supplies designed for your printer. The use of unsuitable materials can cause
poor performance and a possible safety hazard.
• Follow all warnings and instructions marked on, or supplied with, the product, options,
and supplies.
1-4
. In other markets, please contact your local Xerox
Xerox
Physical
® ®
VersaLink C505 Multifunction Printer
User Guide