Xerox VersaLink C505 User Manual page 142

Paper and Media
3. Move the width guides to the edges of the tray.
Note
• To prevent jams, ensure that the leading edge of the envelopes are flat or have
only a slight upward curl, less than 5 mm (.19 in.), before loading into the tray.
If the edge is curled or swollen, fold it over to decurl. The length of the curl must
be within 8–10 mm (.31–.39 in.). Downward curl at the leading edge of envelopes
is not acceptable and can cause a jam or misfeed.
• Load envelopes up to 16.5 mm (.65 in.) in height. This is approximately 10–20
envelopes, depending on brand, size, and texture.
• If you do not load envelopes in the Bypass Tray right after you have removed
the envelopes from the packaging, the envelopes can bulge. To avoid jams,
flatten the envelopes before loading them into the tray.
4. To load the envelopes, select an option:
• For Number 10 envelopes, load the envelopes with the short edge going into the
printer, flaps down, and flaps to the right.
6-18
® ®
Xerox VersaLink C505 Multifunction Printer
User Guide