Xerox VersaLink C505 User Manual page 36

Getting Started
Note
Wireless networking is available only on printers with the optional Wireless Network
Adapter installed.
Installing the Wireless Network Adapter
The optional Wireless Network Adapter plugs in to the back of the printer. After the
adapter is installed, and wireless networking is enabled and configured, the adapter is
able to connect to a wireless network.
To install the Wireless Network Adapter:
1. Power off the printer.
2. To remove the Wireless Network Adapter Port Cover, press down on the latch, then
pull the cover away from the printer.
3. Remove the packaging from the Wireless Network Adapter.
4. To install the Wireless Network Adapter, follow the procedure defined on the
instruction sheet provided with the Wireless Network Adapter.
2-14
® ®
Xerox VersaLink C505 Multifunction Printer
User Guide