Wall-Mounting Instructions - ZyXEL Communications P-661HNU Manual

Table 85 Standards Supported (continued)
STANDARD
RFC 2684
RFC 2766
IEEE 802.11
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n
IEEE 802.11d
802.1x
IEEE 802.11e QoS
ANSI T1.413, Issue 2
G dmt(G.992.1)
ITU G.992.1 (G.DMT)
ITU G.992.2 (G. Lite)
ITU G.992.3
(G.dmt.bis)
ITU G.992.4
(G.lite.bis)
ITU G.992.5 (ADSL2+) ITU standard (also referred to as ADSL2+) that extends the
RFC 2383
TR-069
TR-064
1.363.5

Wall-mounting Instructions

Do the following to hang your ZyXEL Device on a wall.
Note: See Table 82 on page 273
place them.
Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
1
Drill two holes for the screws. Make sure the distance between the centers of the
2
holes matches what is listed in the product specifications appendix.
P-661HNU-Fx User's Guide
DESCRIPTION
Multiprotocol Encapsulation over ATM Adaptation Layer 5
Network Address Translation - Protocol
Also known by the brand Wi-Fi, denotes a set of Wireless LAN/
WLAN standards developed by working group 11 of the IEEE
LAN/MAN Standards Committee (IEEE 802)
Uses the 2.4 gigahertz (GHz) band
Uses the 2.4 gigahertz (GHz) band
Uses the 2.4 gigahertz (GHz) band
Standard for Local and Metropolitan Area Networks: Media
Access Control (MAC) Bridges
Port Based Network Access Control
IEEE 802.11 e Wireless LAN for Quality of Service
Asymmetric Digital Subscriber Line (ADSL) standard
G.992.1 Asymmetrical Digital Subscriber Line (ADSL)
Transceivers
ITU standard for ADSL using discrete multitone modulation
ITU standard for ADSL using discrete multitone modulation
ITU standard (also referred to as ADSL2) that extends the
capability of basic ADSL in data rates
ITU standard (also referred to as ADSL2) that extends the
capability of basic ADSL in data rates
capability of basic ADSL by doubling the number of downstream
bits
ST2+ over ATM Protocol Specification - UNI 3.1 Version
TR-069 DSL Forum Standard for CPE Wan Management
DSL Forum LAN-Side DSL CPE Configuration
Compliant AAL5 SAR (Segmentation And Re-assembly)
for the size of screws to use and how far apart to
Chapter 27 Product Specifications
279