Common Commands; Cli Commands; Table 7: Cli - Root Mode Commands; Table 8: Cli - Command Summary - Redline AN-80i User Manual

4.1.2

Common Commands

Use the following CLI control commands in all configuration modes.
Command
?
CTRL-Z
exit
logout
4.2

CLI Commands

The following table lists all AN-80i commands available from root mode (default
mode when you login). All commands are case-sensitive. Use the following
general format for all commands:
command <Enter>
Command
chgver
get
reboot
reset
save
set
show
snmpcommunity
snmptrap
test
upgrade
user
70-00072-01-01-DRAFT

Table 7: CLI - Root Mode Commands

Description
Use the '?' character to display help for any command or mode.
Example: From the root directory, enter the following command to list all
parameters that can be changed using the 'set' command:
set ?
Return to root mode.
Cancel command entry (alternative to backspace delete).
Return to parent node / mode.
all (exit all) Return to root mode.
Terminate this telnet session. May be entered from any mode.

Table 8: CLI - Command Summary

Description
Change the default version of software and reboot the AN-80i.
Display the value of a statistic or read-only parameter (i.e., MAC).
Reboot the AN-80i.
Reset the AN-80i statistics values.
Save the selected configuration settings (i.e., SNMP settings)
View/modify a system parameter value.
View system compound objects (i.e., configuration settings).
View/modify the SNMP community settings.
View/modify the SNMP trap settings.
Activate edited changes to the system configuration for a test
period of five minutes.
Upload a software binary image to the AN-80i.
View/modify the user/password configuration.
Proprietary Redline Communications © 2006
Page 37 of 60
AN-80i
user manual
October 18, 2006