Table 4: Web - Screens And User Access; Table 5: Web - Default System Users - Redline AN-80i User Manual

Admin Password: Enter the administrator password (security feature).
Add: Click the Add button to make these changes effective.
Delete User
Use this dialog to delete an existing user.
User name: Select an existing user.
Admin Password: Enter the administrator password (security feature).
Del: Click the Del button to make these changes effective.
Group Permissions
The following table lists the permissions associated with each group.

Table 4: Web - Screens and User Access

Screen Admin
Access
General X
Information
System X
Status
System Log X
Configure X
System
Upload X
Software
Users X
Management
X
Product X
Options
Spectrum X
Sweep
The following table lists the default login names and passwords.

Table 5: Web - Default System Users

Group
user
admin
There must always be at least on 'administrator' account active on the system.
If all accounts are changed to 'user' the AN-80i can not be managed.
70-00072-01-01-DRAFT
User Description
Access
X View general system identification and
configuration settings.
X View system information, Ethernet statistics, and
wireless statistics.
X View the system status messages recorded by the
AN-80i.
View and adjust configuration settings for general
system identification, IP address, management
functions, and the wireless interface.
Upload a new software binary file.
X Change your login password.
Add and delete users.
View and change the product options key.
Scan a range of frequencies to detect other RF
sources (interference).
User Name
user
admin
Important
Proprietary Redline Communications © 2006
Page 28 of 60
user manual
Default Password
user
admin
:
AN-80i
October 18, 2006