Snmp Settings Screen; Figure 12: Web - Snmp Configuration Screen - Redline AN-80i User Manual

AN-80i
user manual
3.9

SNMP Settings Screen

Click Configure SNMP (blue text) on the System Configuration screen to view
and edit the SNMP settings. The hyperlink appears only if the SNMP Enable box
is checked.
The SNMP protocol allows an application to interrogate the AN-80i for
information saved in the MIB an to change enabled fields within the MIB. When
the SNMP Agent in the AN-80i detects an error condition, a special message
known as a trap can be sent (if enabled). A Trap Host is an IP system/server that is
set up to receive SNMP trap messages. The SNMP Configuration screen displays a
list of the current communities. The Chg buttons can be used to add, edit, or delete
community settings.

Figure 12: Web - SNMP Configuration Screen

70-00072-01-01-DRAFT Proprietary Redline Communications © 2006 October 18, 2006
Page 31 of 60