Ethernet Lan Statistics; Wireless Statistics; Controls - Redline AN-80i User Manual

AN-80i
user manual
RF Channel Frequency: User-assigned RF channel.
Tx Power: The current transmit power level. If ATPC is enabled, this value may
be different than the Tx Power setting in the System Configuration screen.
Link Distance [Miles or Km]: Distance between wireless systems. This may be
the calculated or user-assigned distance (System Configuration screen).
RF Status [Error Code]: A status code indicating the condition of the system RF
components. See 5.5: Status Codes on page 51.
Ethernet MAC Address: System hardware address. This is also printed on a label
affixed to the AN-80i.
IP Address: User-assigned IP address of the AN-80i.
IP Subnet Mask: User-assigned IP subnet mask.
Default Gateway Address: User-assigned IP for the default router or gateway.

Ethernet LAN Statistics

Rx Packets: Total packets received on the Ethernet port.
Rx Packets: Discarded: Total valid Ethernet frames received on the Ethernet port
that are discarded due to lack of buffer space.
Tx Packets: Number of packets transmitted on the Ethernet port (including Ethernet
frames and error correction bytes).

Wireless Statistics

Received Signal Strength: Min: Minimum measured RSSI value.
Received Signal Strength: Mean: Average measured RSSI value.
Received Signal Strength: Max: Maximum measured RSSI value.
SINADR: Average signal to interference, noise, and distortion ratio measured since
the last screen refresh. The measurement includes the effects of AGC.
Rx Packets: Total number of packets received over the wireless interface.
Rx Packets: Retransmitted Number of packets received over the wireless interface
that were retransmitted by the remote-end system (ARQ mechanism re-transmitting
unacknowledged packets).
Rx Packets - Discarded: Number of received packets discarded due to errors.
Tx Packets: Number of packets transmitted over the wireless interface.
Tx Packets - Retransmitted: Number of packets re-transmitted over the wireless
interface (ARQ mechanism re-transmitting unacknowledged packets).
Tx Packets: Discarded: Total number of packets transmitted over the wireless
interface that were not acknowledged (discarded by remote-end due to errors).

Controls

Reset Statistics: Click this button to zero the counters for the wireless and Ethernet
LAN Statistics displayed on this page.
70-00072-01-01-DRAFT Proprietary Redline Communications © 2006 October 18, 2006
Page 19 of 60