3
W
e
b
3
W
e
b
The Web Interface provides all required settings and statistics necessary to
configure and monitor the operation of the AN-80i using a standard web browser.
An operator can access and control the AN-80i remotely from any geographical
location with HTTP connectivity to that unit.
3.1
System Login
On the PC, open a browser (Internet Explorer 6 or higher recommended). For new
systems, enter the default IP address (192.169.25.2). The following dialog should
be displayed:
Login to the AN-80i using your user name and password. See Table 5: Web -
Default System Users on page 28 for the factory default usernames and passwords.
If the IP address, username and/or password have been modified since installation,
contact the network administrator to determine the current settings. If the IP
address, or the user name and password cannot be determined. See section 5.2:
Procedure to Reset AN-80i IP Address on page 48.
70-00072-01-01-DRAFT
I
n
t
e
r
f
a
c
e
I
n
t
e
r
f
a
c
e
Figure 4: Web - Login Screen
Proprietary Redline Communications © 2006
Page 14 of 60
AN-80i
user manual
Chapter
3
October 18, 2006