Troubleshooting - Electrolux EVYP9841A Owner's Manual

40 www.electrolux.com
4. Hold the door with one hand on each
side and pull it away from the
appliance at an upwards angle.
5. Put the door with the outer side down
on a soft cloth on a stable surface.
This is to prevent scratches.
When the cleaning is completed, install the
door. Do the above steps in the opposite
sequence.
12.6 Replacing the lamp
Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.

13. TROUBLESHOOTING

13.1 What to do if...
Problem
The oven does not heat up. The oven is deactivated.
The oven does not heat up. The clock is not set.
45°
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
WARNING!
Refer to Safety chapters.
The top lamp
1. Turn the lamp glass cover
2. Remove the metal ring and clean the
3. Replace the lamp with a suitable 300
4. Attach the metal ring to the glass
5. Install the glass cover.
The side lamp
1. Remove the left shelf support to get
2. Use a Torx 20 screwdriver to remove
3. Remove and clean the metal frame
4. Replace the lamp with a suitable 300
5. Install the metal frame and the seal.
6. Install the left shelf support.
Possible cause
counterclockwise to remove it.
glass cover.
°C heat-resistant lamp.
cover.
access to the lamp.
the cover.
and the seal.
°C heat-resistant lamp.
Tighten the screws.
Remedy
Activate the oven.
Set the clock.