Overview Of Memory Features; Using The Memory Card - Fluke OF-500-10 Technical Reference Handbook

To mark a topic for quick access later press
Bookmark when the topic you want to mark is displayed.
You can place multiple bookmarks.
To go to a bookmarked topic press
while viewing help; then select the bookmark from the
list.
To go back to the previous topic press

Overview of Memory Features

You can save results on a removable memory card or in
the tester's internal memory.
To set the location for saving tests press
CURRENT FOLDER on the Job tab.
To check the memory status press
A
Memory Status. Press
card and internal memory status.
See Chapter 9 for details about the tester's memory
features.
A
Set
B
Go to Bookmark
C
Back.
S
then select
F
; then select
to switch between the memory

Using the Memory Card

Figure 1-8 shows how to insert and remove a memory
card. You can use MultiMediaCard (MMC) or Secure
Digital (SD) memory cards in the tester.
W
Never remove the memory card while the
memory card's LED is on. Doing so can corrupt
the data on the card.
S
Press ; then select CURRENT FOLDER on the Job tab
to do the following:
•
See the folders available on the memory card
•
Change the destination for saved results. Use
M
to select a folder name; then press
save results on the memory card or in the tester's
internal memory.
•
Create a new folder on the memory card. Press
New Folder. Enter a name in the NEW FOLDER NAME
s
box; then press
•
Delete an empty folder on the memory card. Press
B Delete.
To format the memory card press
Format Memory Card.
Getting Acquainted
Basic Features
Caution
L
t
. You can
A
.
F
; then select
1
or
1-21