Fluke OF-500-10 Technical Reference Handbook page 119

To use the real time trace, do the following:
1 Clean all fiber connectors.
2 Connect the launch fiber between the tester and the
fiber under test.
F
3 Press ; then select Real Time Trace.
To run the real time trace test by pressing
A
Change Test on the HOME screen to set the test
mode to Real Time Trace.
4 During the test, you may do the following:
To switch between Auto Length and Fixed Length,
C
press .
To magnify the trace or use the measurement cursors,
e
press ; then use the softkeys and arrow keys to
zoom or set the cursors.
5 To save the results, press
s
fiber ID; then press
T
, use
s
, select or create a
again.
Using the OTDR
Using the Real Time Trace
3
3-45