Fluke OF-500-10 Technical Reference Handbook page 132

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
5 Clean the connectors on the launch fiber or patch
cord and the channel to be tested.
6 Connect the launch fiber to the OTDR port and the
channel to be mapped, as shown in Figure 4-2.
T
7 Press .
A
Tester with OTDR module
B
Memory card (optional)
C
Spare battery pack (optional)
D
AC adapter with line cord (optional)
4-2
E
F
Figure 4-1. Equipment for ChannelMap Tests
8 To save the results, press
s
fiber ID; then press
Launch fiber or patch cord. Match fiber to be tested.
Match cable connectors at one end. SC at the other
end.
Fiber cleaning supplies
s
, select or create a
again.
ajt48f.eps