A
Tester with OFTM-5612B or OFTM-5732 module.
Match connector adapter to the connectors in the
link.
B
Memory card (optional)
C
Spare battery pack (optional)
D
AC adapter with line cord (optional)
Figure 6-8. Equipment for Testing in Loopback Mode
Using the Loss/Length Option
E
Duplex reference test cord. Match the fiber to be
tested. Connector for the tester's output must be SC.
For the others match the connectors in the link.
F
Two adapters of the appropriate type
G
Mandrel. Recommended when testing multimode
fiber. See page 6-15
H
Fiber cleaning supplies
Testing in Loopback Mode
6
ajt45f.eps
6-25