Table of Contents
Advertisement
OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
Setting User Preferences
The following sections describe settings you may want to
change when you first start using the tester.
Changing the Date, Time, and Numeric Formats
To set the date and time:
S
1
Press
; then press
L
2
Use
to highlight DATE or TIME; then press
N
K
3
Use
or
to highlight the field you want to
M
change; then use
or
s
4
Press
when you are finished.
To select a date, time, or numeric format:
S
1
Press
; then press
L
2
Use
to highlight DATE FORMAT, TIME FORMAT,
or NUMERIC FORMAT; then press
L
3
Use
to highlight the desired format; then press
t
.
1-24
E
to select the System tab.
t
L
to change the setting.
E
to select the System tab.
t
.
Changing the Length Units
S
1
Press
L
2
Use
to highlight LENGTH UNITS; then press
L
3
Use
to highlight the setting you want; then press
t
.
Enabling or Disabling the Save Warning
If you do not save a test, it is deleted from temporary
.
memory when you run another test.
To enable or disable a warning that reminds you about
the unsaved test:
S
1
Press
L
2
Use
to highlight Enabled or Disabled; then press
t
.
Adjusting the Display Brightness
J
Press
to see the brightness adjustment screen. Use
N
or
for coarse adjustments; use
adjustments. Press
The setting is retained when you turn the tester off.
The brightness setting does not affect the battery life.
E
; then press
to select the System tab.
E
; then press
to select the System tab.
D
and
s
when you are finished.
t
.
K
E
for fine
Advertisement
Table of Contents
