Step 5: Running The Test; Step 6: Viewing The Results; Step 7: Saving The Results - Fluke OF-500-10 Technical Reference Handbook

Step 5: Running the Test

5-1 Make the connections for a Smart Remote mode
test, as shown in Figure 2-4. Connect the main unit
to the cabling end identified as END 1 on the Job
tab.
T
5-2 Press .

Step 6: Viewing the Results

The tester offers the following views of loss/length test
results:
•
The SUMMARY screen, shown when the test is
finished, tells you if the cabling passed or failed
based on the selected test limits.
•
To see more details about the cabling, press
View Results.
See Chapter 6 for details on loss/length results.

Step 7: Saving the Results

The tester saves Smart Remote test results in
two separate records. One record is used for
each fiber.
7-1 Press
7-2 If the tester shows a text editing screen, press
Pick ID to access the fiber ID list you configured.
7-3 The tester highlights the first unused ID in the
UNUSED AUTO SEQUENCE IDs list. Press s to
save the results from one fiber.
7-4 Press s again to save the results from the second
A
fiber, using the next ID in the list.
This concludes the tutorial on using the loss/length
option. See Chapter 6 for additional information on the
loss/length option.
Getting Started Testing Fiber
Tutorial: Running a Loss/Length Test
Note
s
.
2
A
2-21