Fluke OF-500-10 Technical Reference Handbook page 141

A
The magnification indicator. Press
the magnification to match the FiberInspector probe's
setting (250X or 400X). The setting determines the size
of the scale used for measuring core sizes. The setting is
also stored with saved images.
B
The Visual Quality result is stored with saved images.
C
Press Grade Image to assign a PASS, FAIL, or Not
Graded result to the image.
C
The limit used to grade the image. Future software
releases may include limits for automatically grading
endface images. When the limit is Manual, press
C
Grade Image to manually assign a grade.
D
A
Press More to toggle between the softkey sets.
E
B
Camera to set
F
G
H
I
Figure 5-3. Fiber Inspector Screen (cont.)
Using the FiberInspector Option
D
Press Auto Center to quickly center the image. You
can also use the arrow keys to move the image.
E
Press Still to conserve battery life by capturing the
image and turning off the probe. In still mode you can
also use the core size scale. See "Using the Core Scale"
on page 5-8.
C
Press Image Contrast to adjust the brightness and
contrast of the image.
D
Press Edit Comment to add a comment that will be
stored with the saved image.
E
Press Full Screen to use the entire screen for the
endface image.
5
Using the Probe
5-5