Table of Contents
Advertisement
Setting
COMPANY
OPERATOR
CURRENT FOLDER
END 1, END 2
THIS END
AUTO SEQ TEMPLATE
START ID, END ID
Table 2-2. Job Settings
The customer name, job site, job work order, or other job identifier.
The name of the OptiFiber user.
The destination for tests you save. You can save tests in a folder on the memory card or in the
tester's internal memory. Selecting CURRENT FOLDER also lets you create a new folder on the
memory card. You cannot create folders in internal memory.
Names you assign to the ends of the cabling. The names are saved with test records and also
appear on ChannelMap diagrams.
The cable end where the tester is located. Based on this setting, the tester labels OTDR,
ChannelMap, FiberInspector, and power meter results as END 1 or END 2 to indicate which end
of the cabling you tested. Loss/length results are labeled END 1-2 or END 2-1.
The name of the pattern selected for the list of sequential fiber IDs. See "Creating a List of
Sequential IDs" on page 2-24 for details.
The first and last IDs in the auto sequence list. See "Creating a List of Sequential IDs" on page
2-24 for details.
Getting Started Testing Fiber
Description
2
General Test Settings
2-9
Advertisement
Table of Contents
