Fluke OF-500-10 Technical Reference Handbook page 156

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
Location
Set from the TEST
SETUP screen after
setting a reference or
B
press Test Setup
from the Loss/Length
HOME screen
Set after pressing
T
.
6-12
Table 6-1. Loss/Length Test Settings (cont.)
Setting
Reference test After you set a reference, you can enter the lengths of the reference test
cord length cords used. The lengths are saved with results to meet TSB-140 reporting
(optional) requirements for fiber test results.
Wavelength In Smart Remote and Loopback modes, the tester automatically tests at
both wavelengths supported by the installed module. In Far End Source
mode, the tester prompts you to select a wavelength after you start a test.
Description