Using The Vfl - Fluke OF-500-10 Technical Reference Handbook

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook

Using the VFL

Figure 7-1 shows the equipment required for using the
VFL.
The visual fault locator port accepts connectors with 2.5
mm ferrules (SC, ST, or FC). To connect to other ferrule
sizes, use a patch cord with the appropriate connector at
one end and a SC, ST, or FC connector at the tester end.
7-2
A
Tester with OFTM-573x module
B
AC adapter with line cord (optional)
C
One patch cord. Match the fiber and connectors to
be tested; SC, ST, or FC at tester end. (optional)
D
Fiber cleaning supplies
Figure 7-1. Equipment for Using the Visual Fault
Locator
ajt04f.eps