Mitsubishi Electric HG-KN Instruction Manual page 4

4. Additional instructions
The following instructions should also be fully noted. Incorrect handling may cause a malfunction, injury,
electric shock, fire, etc.
(1) Transportation and installation
Transport the products correctly according to their mass.
Stacking in excess of the specified number of product packages is not allowed.
Do not hold the cables, connectors, shaft, or encoder when carrying the servo motor. Otherwise, it may
drop.
Install the servo motor in a load-bearing place in accordance with the Instruction Manual.
Do not get on or put heavy load on the equipment. Otherwise, it may cause injury.
The equipment must be installed in the specified direction.
Do not install or operate the servo motor which have been damaged or have any parts missing.
Do not drop or strike the servo motor. Otherwise, injury, malfunction, etc. may occur.
Securely fix the servo motor to the machine. If being attached insecurely, the motor may come off during
operation.
When handling the servo motor, be careful with the sharp edges of the servo motor, shaft keyway, or
others.
Do not strike the connector. Otherwise, a connection failure, malfunction, etc. may occur.
Be sure to measure the vibration level with the servo motor mounted on the machine when checking the
vibration level. A great vibration may cause the early damage of a bearing, encoder, and brake. The
great vibration may also cause the poor connector connection or bolt looseness.
For the gain adjustment at the equipment startup, check the torque waveform and the speed waveform
with a measurement device to check that no vibration occurs. If the vibration occurs due to high gain, the
vibration may cause the early damage of the servo motor.
Take safety measures, e.g. provide covers, to prevent accidental access to the rotor of the servo motor
during operation.
Never hit the servo motor or shaft, especially when coupling the servo motor to the machine. Otherwise,
the encoder may malfunction.
Do not subject the servo motor shaft to more than the permissible load. Otherwise, the shaft may break.
To prevent a fire or injury from occurring in case of an earthquake or other natural disasters, securely
install, mount, and wire the servo motor in accordance with the Instruction Manual.
When you keep or use the equipment, please fulfill the following environment.
Ambient temperature
Ambient humidity
Vibration resistance
Note. Contact your local sales office for the altitude for options.
CAUTION
Item
Operation
Storage
Operation
Storage
Ambience
Altitude
HG-KN series
HG-SN52/HG-SN102/HG-SN152
HG-SN202/HG-SN302
A - 3
Environment
0 °C to 40 °C (non-freezing)
-15 °C to 70 °C (non-freezing)
10 %RH to 80 %RH (non-condensing)
10 %RH to 90 %RH (non-condensing)
Indoors (no direct sunlight), free from corrosive
gas, flammable gas, oil mist, dust, and dirt
Max. 2000 m above sea level (Note)
X, Y: 49 m/s
X, Y: 24.5 m/s
X: 24.5 m/s 2 Y: 49 m/s
2
2
2