Remote Administration - Planet ADSL 2/2+ VoIP Router IAD-200W User Manual

Remote Administration

If enabled, this feature allows you to manage the IAD-200 / IAD-200W via the Internet.
Data - Remote Administration Screen
Remote Administration
Enable Remote
Management
Current
IP Address
Port Number
Access Permission
Allow Remote
Access
Figure 62: Remote Administration Screen
Check to allow administration/management via the Internet. (To
connect, see below).
If Disabled, this device will ignore Administration connection
attempts from the Internet.
This is the current address you will use when accessing this device
from the Internet. To connect, see details and an example below.
Enter a port number between 1 and 65535. The default for HTTP
(Web) connections is port 80, but using port 80 will prevent the use
of a Web "Virtual Server" on your LAN. So using a different port
number is recommended. The default value is 8080.
The port number must be specified in your Browser when you
connect. See the following section for details.
Select the desired option.
•
Everyone - allow access by everyone on the Internet.
•
Only This Computer - allow access by only one IP address.
Enter the desired IP address.
•
IP Address Range - allow access from a range of IP addresses
on the Internet. Enter a beginning and ending IP address to de-
fine the allowed range.
83