Wireless Screen (IAD-200W only)
The IAD-200W's settings must match the other Wireless stations.
Note that the IAD-200W will automatically accept both 802.11b and 802.11g connections, and
no configuration is required for this feature.
To change the IAD-200W's default settings for the Wireless Access Point feature, use the
Wireless link on the main menu to reach the Wireless screen. An example screen is shown
below.
Data - Wireless Screen
Identification
Region
Station name
Figure 7: Wireless Screen
Select the correct domain for your location. It is your responsibility to
ensure:
•
That the IAD-200W is only used in domains for which is licensed.
•
That you select the correct domain, so that only the legal channels
for that domain can be selected.
This is the same as the "Device Name" for the IAD-200W.
17