Chapter 2
Installation
This Chapter covers the physical installation of the ADSL 2/2+ VoIP router
(IAD-200) / 802.11g ADSL 2/2+ VoIP router (IAD-200W).
Requirements
•
TCP/IP protocol must be installed on all PCs.
•
To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE
802.11g or IEEE 802.11b specifications.
•
For Internet Access, an ADSL service and ISP account.
•
For VoIP, a SIP account with a VoIP service provider.
Procedure
1. Choose an Installation Site
Select a suitable place on the network to install the IAD-200 / IAD-200W. Ensure the
power is OFF.
For best Wireless reception and performance, the IAD-200W
should be positioned in a central location with minimum obstruc-
tions between the device and the PCs.
Also, if using multiple Access Points, adjacent Access Points should
use different Channels.
Figure 4: Installation Diagram
2
8