Table of Contents
Advertisement
5.1.3
Remote Management
You can specify a Host IP address that can perform remote management from Internet.
Parameters
Description
Host Address
The IP address of the
access to the Broadband router from a remote site. This means if you are at home and
your home IP address has been designated the Remote Management host IP address
for this router (ex. located in your office), then you are able to configure this router from
your home. Left it to 0.0.0.0 means anyone can access the router's web-based
configuration from any remote location.
Click the Enabled box to enable the Remote Management function.
When you want to access the web-based management from a remote site,
ë Note
you must enter the router's WAN IP address (e.g. 10.0.0.1) into your
web-browser followed by port number 8080, e.g. 10.0.0.1:8080 (see
below). You'll also need to know the password set in the Password
Setting screen in order to access the router's web-based management.
Click "Apply" button of the screen to save the above configurations. You can now configure other
advance sections or start using the router.
host in the Internet that will have management / configuration
- 20 -
Advertisement
Table of Contents
