Table of Contents
Advertisement
Physical Details
Front-mounted LEDs
IAD-200
IAD-200W
Power LED
On - Power on.
(Green)
Off - No power.
Status LED
Off - Normal operation.
(Yellow)
Blinking - This LED blinks during start up, and during a Firmware Up-
grade.
•
LAN
•
If neither LED is on, there is no active connection on the LAN port.
WLAN LED
On - Wireless enabled.
(IAD-200W
Off - No Wireless connections currently exist.
only)
Flashing - Data is being transmitted or received via the Wireless access
point. This includes "network traffic" as well as user data.
ADSL
On - ADSL connection established. (This is a low-level connection, it
does not mean Internet access is available.)
Off - No ADSL connection currently exists.
Flashing - Data is being transmitted or received via the ADSL connection.
PSTN
Off - Idle or not connected.
Flashing - PSTN line is in use.
Phone
On - Connected to SIP Server.
Off - Idle or not connected.
Flashing (quickly) -Phone is in use.
Figure 2: Front Panel
100BT - This will be ON if the LAN connection is using 100BaseT,
and Blinking if data is being transferred via the LAN port.
10BT - This will be ON if the LAN connection is using 10BaseT, and
Blinking if data is being transferred via the LAN port.
5
Advertisement
Table of Contents
