Firewall Rules
The Firewall Rules screen allows you to define "Firewall Rules" which can allow or prevent
certain traffic. "Traffic" means incoming connection attempts, not packets.
By default:
•
All Outgoing traffic is permitted.
•
All Incoming traffic is denied.
Because of this default behavior, any Outgoing rules will generally Block traffic, and Incom-
ing rules will generally Allow traffic.
Firewall Rules Screen
An example screen is shown below.
Data - Firewall Rules
Incoming Rules
#
Enable
Service Name
Figure 44 Firewall Screen
For the default rule, this will display "Default".
For rules which you create, this will display a radio button which
allows you to select the rule.
Indicates whether or not the rule is currently enabled.
For rules you have added, this column will contain a checkbox,
allowing you to easily enable or disable the rule. (Click "Save" after
making any changes.)
The Service covered by this rule.
54