Using The Remote Osd Feature - Black Box ACR1000A-CTL-24 Manual

5.4 Using the Remote OSD feature

The Remote OSD feature allows authorized users to access and take control of Agility receivers other than the one to which they
are connected. Once linked in, users can then determine which channels the remote receivers should link with.
Remote OSD requires the following:
• The iPATH Agility Controller(s) and all Agility units must have firmware version 3.0 or greater.
• A user must have been given specific authorization to access one or more remote receivers.
5.4.1 To access the Remote OSD
1 On the keyboard connected to your Agility receiver, press the hotkey combination Ctrl-Alt-C to display the Local OSD login
screen.
2 If required, enter your Username and
Password and click the Login button.
3 In the top right corner, click the
4 The screen will list all of the receivers to
which you have access rights. Click on the
required receiver from the list:
5 The Remote OSD for the chosen Agility
receiver will be displayed. Remote OSDs
always have black horizontal bars in the
background to differentiate them from the
standard local OSD:
6 The behavior of the controls is generally
the same as for the Local OSD screen with
the following exceptions:
• To avoid confusion, you cannot login or
logout while in Remote OSD mode. Click
the icon to first return to the Local OSD.
• Hotkeys will only affect the current receiver
to which you are connected, not the
remotely-controlled receiver.
7 To exit from the Remote OSD, click the
icon in the top right corner.
icon.
724-746-5500 | blackbox.com
Chapter 5: Operation
Page 61