Related Manuals for Black Box LES1204A-3G-R2
Summary of Contents for Black Box LES1204A-3G-R2
- Page 1 LES1204A-3G-R2 Remote Console Manager with GSM Modem QS Guide Quick Start Guide This Quick Start Guide helps you through installation, configuration, and local operation. For more details, refer to the user manual.
- Page 2 Remote Console Manager (LES1204A-3G-R2) Quick Start Guide Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Cisco is a registered trademark of Cisco Technology, Inc. Linux is a registered trademark of Linus Torvalds.
- Page 3 (1) RF antenna with bracket mount and 1-ft. (30-cm) cable Universal input 12-VDC power pack NOTE: To download the user manual, visit the Black Box Web site and enter LES1204A-3G-R2 in the search bar. Step 2: Connect the hardware.
- Page 4 Remote Console Manager (LES1204A-3G-R2) Quick Start Guide Plug the power pack into the AC power receptacle and connect the DC power cable to the Remote Console Manager’s 9-12 VDC power socket. NOTE: On applying power, the “SIM” LED on top of the Remote Console Manager will go on solid, indicating that the SIM has been inserted and detected.
- Page 5 Remote Console Manager (LES1204A-3G-R2) Quick Start Guide Figure 2. Serial & Network: User & Groups screen. To assign your Remote Console Manager a static IP address or to permanently enable DHCP, select “System: IP” then “Network Interface” and check “DHCP” or “Static” for configuration method.
- Page 6 Remote Console Manager (LES1204A-3G-R2) Quick Start Guide Step 4: Configure serial and network devices. Select “Serial & Network: Serial Port,” which will display the label, mode, and protocol options currently set for the serial port. By default, all the serial ports, except Port 1, are set to console server mode (see the user‘s...
- Page 7 Remote Console Manager (LES1204A-3G-R2) Quick Start Guide Figure 5. Serial & Network: Network Hosts screen. Enter the IP address/DNS name of the host. Edit the permitted services used for accessing this host, for example, HTTPS (TCP port 443), VNC (TCP port 5900), or add custom TCP or UDP port numbers—only the services specified here are tunneled...
- Page 8 Remote Console Manager (LES1204A-3G-R2) Quick Start Guide Figure 6. Serial & Network: Users & Groups screen. NOTE: The Remote Console Manager comes with a default certificate for initial configuration purposes only. You will need to direct your browser to (temporarily) proceed and accept this untrusted certificate. It is recommended as soon as possible thereafter you generate and install a new trusted certificate.
- Page 9 Remote Console Manager (LES1204A-3G-R2) Quick Start Guide Select “Internal Cellular Modem” on the “System: Dial” menu and check “Enable Dial-Out.” Enter the carrier’s APN e.g. for AT&T (USA) simply enter “i2gold”, for T-Mobile (USA) enter “epc.tmobile.com”, for InterNode (Aust) enter “internode”...
- Page 10 Remote Console Manager (LES1204A-3G-R2) Quick Start Guide Step 7: Out of band access. To directly access the Remote Console Manager, it needs to have a Public IP address and it must not have SSH access firewalled. Almost all carriers and cellular service providers offer corporate mobile data service/plans with a Public (static or dynamic) IP address.
- Page 11 To download the user manual from the Web site: 1. Go to www.blackbox.com 2. Enter the product code (LES1204A-3G-R2) in the search box: 3. Click on the “Resources” tab on the product page, and select the document you wish to download.
- Page 12 LES1204A-3G-R2 QSG, rev. 6...