Appendix D. Upgrade Licence - Black Box ACR1000A-CTL-24 Manual

Appendix D. Upgrade Licence

iPATH Agility Controllers are licenced according to the number of devices that can be managed. As your installation grows you
can purchase an updated iPATH licence at any time using the following procedure. Four licences are available, ranging from a
maximum of 24 managed devices up to a maximum of 288:
• iPATH-24-48UPG - increases the maximum number of managed devices from 24 to 48.
• iPATH-48-96UPG - increases the maximum number of managed devices from 48 to 96.
• iPATH-96-192UPG - increases the maximum number of managed devices from 96 to 192.
• iPATH-192-288UPG - increases the maximum number of managed devices from 192 to 288.
D.1 To upgrade your iPATH licence
1 Visit the Dashboard > Settings > General page of the iPATH unit to be upgraded. At the bottom of the page, click the 'upgrade
licence' link:
The subsequent file dialog will show a Product Code that is unique to your iPATH Agility Controller.
2 Contact your supplier and quote all of the following:
• The unique product code,
• The serial number of the iPATH Agility Controller (marked on a label on the base of the unit),
• The current number of supported devices, and
• The number of devices to which you wish to upgrade.
3 The supplier will provide a licence key, which is unique to unit to the unit to be upgraded. Enter the new licence key into the
blank entry in the page shown above.
Note: It is important that you only enter the licence key into the specific iPATH unit.
If the upgrade is successful, the new number of supported devices will be shown in the Dashboard > Settings > General page.
724-746-5500 | blackbox.com
Appendices
Page 71