Black Box ACR1000A-CTL-24 Manual page 28

iPATH Agility Controller
4.4.2.3 Dashboard > Settings > Receivers
This page applies a standard global configuration to all receivers.
Hotkey settings
The first few rows determine the Hotkeys that can be used to invoke certain functions. It is possible to select mouse keys to
perform these functions, though it is not possible to use both mouse switching and a hot key combination. It is also not possible
to mix left and right function keys. Left Ctrl and Left ALT are the default settings.
Login required
Determines whether it is necessary to log into the receiver.
Enable Receiver OSD Alerts
Determine the required setting for pop up OSD alerts: No or Yes.
Video Compatibility Check
This reads the EDID from the attached monitor and determines whether the monitor is capable of displaying the selected video
mode before connecting a channel. This prevents the receiver showing a black screen and the user being locked out because a
dual link resolution has been selected to display on a single link monitor.
Force 60Hz
If enabled, the receiver frame rate is held at 60Hz regardless of the video input frame rate. The Video Switching options (below)
cannot be altered when this option is enabled.
Video switching
Provides two options for video switching:
• Fast Switching (default state) - Retains the same frame rate (at either 50Hz or 60Hz) depending upon which video resolution
was displayed first.
• Match Frame Rate - Follows the source frame rate and will change the frame rate every time this changes even if the video
resolution doesn't change. If you have one receiver switching between 1920x1080@60Hz and 1920x1080@50Hz then this
setting will change the frame rate from 60Hz to 50 Hz every time that you switch.
Receiver Keyboard Country Code
Select the country code of the keyboard connected to the receiver.
Audio Input Type
Select the required audio input type.
Page 28
724-746-5500 | blackbox.com