Using The Remote Osd Feature - Black Box iPATH ACR1000A-CTL-24 User Manual

5.4 USING THE REMOTE OSD FEATURE

The Remote OSD feature allows authorized users to access and take control of Agility remotes other than the one to which they
are connected. Once linked in, users can then determine which channels the remotes should link with.
Remote OSD requires the following:
• The iPATH Agility Controller(s) and all Agility units must have firmware version 3.0 or greater.
• A user must have been given specific authorization to access one or more remotes.
5.5.1 TO ACCESS THE REMOTE OSD
1 On the keyboard connected to your Agility
remote, press the hotkey combination Ctrl-
Alt-C to display the Local OSD login screen.
2 If required, enter your Username and
Password and click the Login button.
3 In the top right corner, click the
4 The screen will list all of the remotes to
which you have access rights. Click on the
required remote from the list:
5 The Remote OSD for the chosen Agility
remote will be displayed. Remote OSDs
always have black horizontal bars in the
background to differentiate them from the
standard local OSD:
6 The behavior of the controls is generally
the same as for the Local OSD screen with
the following exceptions:
• To avoid confusion, you cannot login or
logout while in Remote OSD mode. Click
the icon to first return to the Local
OSD.
• Hotkeys will only affect the current remote
to which you are connected, not the
remotely-controlled remote.
7 To exit from the Remote OSD, click the
icon in the top right corner.
icon.
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
63