Black Box ACR1000A-CTL-24 Manual page 25

Chapter 4: Configuration
Note: By default, all new channels are set to inherit this global value. So it's easy to change all channel connection modes sim-
ply by changing the global setting. If a channel has its own setting, the global setting has no effect on that channel.
* If USB is disabled, Shared mode will not be available as an option.
Initial Streaming Mode
All new connections are created in unicast mode in order to minimize multicast traffic on network switches that may have limited
IGMP snooping capabilities. If a second receiver connects to the same channel, the unicast connection is briefly disconnected and
replaced with the new multicast connection. The first-connected receiver would experience a brief screen black-out.
Selecting multicast in this option causes new connections to start directly in multicast mode so that subsequent receivers can
connect to the same channel or video stream without causing any interruption to the initial video connection.
Rows per page
The number of rows to display in all paginated tables in the admin section.
Locale
Determines the language shown on the OSD menus of the receivers. Note the admin configuration web pages remain in English.
Device statistics
Allows the managed devices to generate statistics. This option needs to be enabled before iPATH Agility Controller will display any
statistics on it statistics page.
Debug Level
This allows information to be collected for diagnostic purposes. Do not use the full level unless advised by a technical support
engineer.
API Login required
If enabled, the anonymous use of the iPATH Agility Controller API will be disallowed.
Anonymous user
Determines the user permissions to be used when the API is accessed without logging in.
Upgrade Licence (see Appendix D for details)
Displays information about the number of devices that can be connected to the iPATH Agility Controller.
724-746-5500 | blackbox.com
Page 25